SYNCO Vlogger Kit 1

SYNCO Vlog Kit 1

The first SYNCO vlog kit is a complete combination of every piece of equipment you need in each live streaming. It mainly consists of a directional microphone, a fill light, and a smartphone video rig, a tripod, intended to be a perfect solution for premium content creating. 

Quality Sound for Excellent Results

The microphone for vlogging is SYNCO Mic-M1S. A Φ14 large condenser is in-built for fine processing of audio signals and the cardioid polar pattern is ensured for precise pickup of target sound, thus delivering excellent sound in any situation.

SYNCO Vlogger Kit 1 Quality Sound for Excellent Results
SYNCO Vlogger Kit 1 Natural Light for Live Performance

Natural Light for Live Performance

The SYNCO LED video light gives 2 typical modes - Mode CCT for complete control over both color temperature (2700-6500K) and brightness (0-100%) and EFF for special lighting (lightning and fire), which goes with the 95+ color rendering to ensure better spot effect.

Reduced Shock for Smooth Recording

The upgraded shock absorption design decentralizes and absorb the vibrations of the small microphone with 4 rubber rings, effectively cutting down on the vibrations during recording.

SYNCO Vlogger Kit 1 Reduced Shock for Smooth Recording
SYNCO Vlogger Kit 1

The first SYNCO vlog kit is an all-in-one perfect solution for premium content creating, with every piece of vlogging equipment.

Quality Sound for Excellent Results

The microphone for vlogging M1S is perfect in target sound pickup and audio signal processing, thus delivering professional sound.

SYNCO Vlogger Kit 1 Quality Sound for Excellent Results

Ultra-flat Frequency Response

The frequency response range is 20Hz—20KHz. With ultra-flat frequency response, Mic-D2 outputs all the frequencies that we can hear at once and produces accurate natural sound from the source.

Natural Light for Live Performance

The LED video light provides 2 lighting modes and high color rendering for better spot effect.

SYNCO Vlogger Kit 1 Natural Light for Live Performance

Reduced Shock for Smooth Recording

The upgraded shock mount with 4 rubber rings reduces the vibrations greatly.

SYNCO Vlogger Kit 1 Reduced Shock for Smooth Recording

More Flexibility for Perfect Shooting

The tripod is 360 degree flexible, perfect for every angle shot.

SYNCO Vlogger Kit 1 More Flexibility for Perfect Shooting

Easy Setup for Instant Play

The smartphone video rig is easy to connect to the microphone, fill light, and more.

SYNCO Vlogger Kit 1 Easy Setup for Instant Play

All-in-one Solution for Every Run-and-gun 

Plug-and-play, button-free, battery-free, direct charging, a perfect choice for run and gun. 

SYNCO Vlogger Kit 1 All-in-one Solution for Every Run-and-gun
SYNCO Vlogger Kit 1 More Flexibility for Perfect Shooting

More Flexibility for Perfect Shooting

A mini tripod is included to mount the smartphone or the light. It features a 360 degree swivel ball head for more flexibility, guaranteeing the perfect shot every time.

Easy Setup for Instant Play

The SYNCO mobile vlogging kit provides a smartphone video rig for hand-held use and tabletop shooting. The external microphone, fill light, tripod, and other devices are set on it using the cold shoe mounts or the 1/4” threads only.

SYNCO Vlogger Kit 1 Easy Setup for Instant Play
SYNCO Vlogger Kit 1 All-in-one Solution for Every Run-and-gun

All-in-one Solution for Every Run-and-gun

The plug-and-play and button-free design allows the portable microphone to work once plugged, and the battery-free LED light is powered by devices directly, both very convenient for run-and-gun shooting. Just connect all parts together and get natural and vivid vlogging!

Specifications

Microphone

Transducer
Condenser
Polar Pattern
Cardioid
Frequency Response
100Hz-20KHz/ ±3dB
Signal/Noise
>60dB
Max. SPL
130dB@1KHz, 1%THD
Sensitivity
-35dB re 1 Volt/pasal(18.00mV@94dB SPL ) +1/-2dB@1KHz
Power Requirement
Plug-in Power
Connector3.5mm TRS/3.5mm TRRS
DimensionsΦ21.5x 72mm
Net Weight
35g

LED Video Light

Color Rendering Index
Ra≥95
Color Temperature Range
2700K-6500K (±100K)
Illumination
1500Lux (at 30cm 6500K)
Number of Bead
48 pieces
Battery Capacity
2100mAh
Power
5W
Runtime
100% brightness for about 90 minutes
Input Voltage
5V/1A
Charging Port
Type-C
Charging Time
2.5h
Body Material
Plastic
Weight
110g
Dimensions110*65*15 (L*W*H)

Video Rig

Material
Plastic
Color
Black
Dimension
25*13*3.5 cm

Specifications

Microphone

Transducer
Condenser
Polar Pattern
Cardioid
Frequency Response
100Hz-20KHz/ ±3dB
Signal/Noise>60dB
Max. SPL
130dB@1KHz, 1%THD
Sensitivity
-35dB re 1 Volt/pasal(18.00mV@94dB SPL ) +1/-2dB@1KHz
Power Requirement
Plug-in Power
Connector
3.5mm TRS/3.5mm TRRS
Dimensions
Φ21.5x 72mm
Net Weight
35g

LED Video Light 

Color Rendering Index
Ra≥95
Color Temperature Range
2700K-6500K (±100K)
Illumination
1500Lux (at 30cm 6500K)
Number of Bead
48 pieces
Battery Capacity
2100mAh
Power5W
Runtime
100% brightness for about 90 minutes
Input Voltage
5V/1A
Charging Port
Type-C
Charging Time
2.5H
Body Material
Plastic
Weight
110g
Dimension (mm)
110*65*15 (L*W*H)

Video Rig

Material
Plastic
Color

Black
Dimension
25*13*3.5 cm

Showcase

Showcase

SYNCO Vlogger Kit 2
SYNCO Vlogger Kit 2
SYNCO Vlogger Kit 2 Application
SYNCO Mic-M1S
SYNCO Mic-M1S
SYNCO Mic-M1S Application
SYNCO G1(A1)
SYNCO G1(A1)
SYNCO G1(A1) Application
SYNCO CMic-V1M
SYNCO CMic-V1M
SYNCO CMic-V1M
SYNCO Vlogger Kit 2
SYNCO Vlogger Kit 2
SYNCO Vlogger Kit 2 Application
SYNCO Mic-M1S
SYNCO Mic-M1S
SYNCO Mic-M1S Application

Quickstart Guide

  • Place the small directional microphone into the shock mount and fasten the mic;
  • Cover the M1S camera mic with the windshield;
  • Connect the video rig to the tripod with the 1/4’’ thread on the bottom or at the right side for horizontal or vertical filming;
  • Unscrew the knob on the back of the rig to broaden the phone clamp;
  • Put the smartphone into the clamp and screw the knob tightly to fix it;
  • Connect the directional microphone and the video light to the video rig with the cold shoe mounts;
  • Connect the microphone to the phone using the 3.5mm TRRS phone cable; 
  • Adjust the light? Please see the User Manual at the Downloads section.

Quickstart Guide

  • Place the small directional microphone into the shock mount and fasten the mic;
  • Cover the M1S camera mic with the windshield;
  • Connect the video rig to the tripod with the 1/4’’ thread on the bottom or at the right side for horizontal or vertical filming;
  • Unscrew the knob on the back of the rig to broaden the phone clamp;
  • Put the smartphone into the clamp and screw the knob tightly to fix it;
  • Connect the directional microphone and the video light to the video rig with the cold shoe mounts;
  • Connect the microphone to the phone using the 3.5mm TRRS phone cable;
  • Adjust the light? Please see the User Manual at the Downloads section.

Downloads

  • User Manual for SYNCO Vlogger Kit 1 (English)

Downloads

  • User Manual for SYNCO Vlogger Kit 1 (English)