SYNCO G2(A1)

Lavalier Wireless Microphone System SYNCO G2(A1)

The G2 is the 2nd generation lavalier wireless microphone system of SYNCO running at 2.4GHz band. It is reborn with a display, making all key indicators seeable. It continues processing the input audio via patented technology and sending clean, clear audio based on 2.4GHz digital transmission technology. Similar to the G1, this wireless microphone system also comes in 2 forms, including this 1-to-1 G2(A1) and the 1-to-2 G2(A2). The G2(A1) with one transmitter and one receiver, is an excellent wireless mic solution for content creators in every field: stage performers, on-camera presenters, vloggers and more.

SYNCO G2(A1) Brandnew TFT Display as Strong Boost to SYNCO 2.4 GHz System

Brandnew TFT Display as Strong Boost to SYNCO 2.4 GHz System

Different from G1, either the transmitter or the receiver of this new digital wireless microphone system carries a true-color TFT display to make the device readable under different light intensities. The recording mode, battery status, and audio level are all seeable.  

Upgraded Algorithm for More Stable, Safe Transmission

The SyncoderTM Encrypted Transmission Algorithm 2.0 in this lavalier microphone wireless enhances the signal stability within 492ft/150m (Line-Of-Sight) and 164ft/50m (Non-Line-Of-Sight) effective range. It is the Frequency Hopping Spread Spectrum (FHSS) technique that on it’s own intuitive detects the location and then turns to the optimal frequency so that no signal conflicts would occur. This also helps protect privacy and reduce interference.

SYNCO G2(A1) Upgraded Algorithm for More Stable, Safe Transmission
SYNCO G2(A1) Integrated Signal Processing for Little Latency Sound Production

Integrated Signal Processing for Little Latency Sound Production

The Digital Signal Processor (DSP) chip in the SYNCO G2 best wireless lavalier microphone optimizes the signal from input to output directly. The full synchronization of signal capture, processing, and delivery guarantees almost no latency in transmission and high quality in sound production, excellent for immediate use and suitable for live streaming.

Quick Charge for Every Continued Filming

The 2-in-1 charging solution allows simultaneous charging of the wireless microphone receiver and transmitter with only one power source. It takes only 40 mins to get the device 50% powered and 1 hour for 80%. The enhanced battery supports 8-hour continued recording if fully charged.  

SYNCO G2(A1) Quick Charge for Every Continued Filming
SYNCO G2(A1) Small Features Packed For Each Optimization

Small Features Packed For Each Optimization

A button is designed to mute the lavalier microphone for a while rather than turning off the whole system when team communication, device setup, etc. is a must. The low cut, gain control, and real-time monitoring function to give a wider range of adjustment, hence making sure that the microphone system works under more conditions.

Pocket Size for Invisible but Audible Effect

Mobile content creators would like the pocket microphone G2. The transmitter and receiver each weighs only 39g and is 52*42*17mm sized, easy to be concealed and inconspicuous in most recording scenarios.

SYNCO G2(A1) Pocket Size for Invisible but Audible Effect
SYNCO G2(A1)

The SYNCO G2(A1) is a 1-to-1 lavalier wireless microphone system that is reborn to feature a display.

Brandnew TFT Display as Strong Boost to SYNCO 2.4 GHz System

Either the transmitter or the receiver carries a true-color TFT display to clearly show every key figure.

SYNCO G2(A1) Brandnew TFT Display as Strong Boost to SYNCO 2.4 GHz System

Ultra-flat Frequency Response

The frequency response range is 20Hz—20KHz. With ultra-flat frequency response, Mic-D2 outputs all the frequencies that we can hear at once and produces accurate natural sound from the source.

Upgraded Algorithm for More Stable, Safe Transmission

The transmission algorithm is upgraded to enhance the signal stability at the max. 150m effective range.

SYNCO G2(A1) Upgraded Algorithm for More Stable, Safe Transmission

Integrated Signal Processing for Little Latency Sound Production

The DSP technology enable the direct modification of signals from input to output, making almost no latency in transmission.

SYNCO G2(A1) Integrated Signal Processing for Little Latency Sound Production

Quick Charge for Every Continued Filming

It takes 40mins to get the devices 50% charged simultaneously and allows 8-hour continued working if fully charged.

SYNCO G2(A1) Quick Charge for Every Continued Filming

Small Features Packed For Each Optimization

The one-button muting, low cut, gain control, and real-time monitoring functions enable a wider range of adjustment and a more-condition application.

SYNCO G2(A1) Small Features Packed For Each Optimization

Pocket Size for Invisible but Audible Effect

The transmitter and receiver each weighs only 39g and is 52*42*17mm sized, easy to be concealed and inconspicuous in most recording scenarios.

SYNCO G2(A1) Pocket Size for Invisible but Audible Effect

Specifications

Transmitter (TX )

Wireless Transmission
Digital 2.4GHz
RF Frequency Band
2400-2483.5MHz
Frequency Response
20Hz-20KHz
Working Distance
492ft/150m(LOS area),
164ft/50m(NLOS area)

MountingPocket Clip
Audio Input
1/8" / 3.5mm TRS Mic Input
Audio Input Level
1V (0dBV)
RF Output Power
<10mW
Power Requirements
3.3V-4.7V
Battery Type
Built-in Lithium Battery, 500mAh
Battery Charging Time
1.5h
Battery Life
8h
Display
TFT Screen
Dimensions
52×42×17mm
Material
Plastic
Weight39g


Receiver (RX)

Wireless Transmission
Digital 2.4GHz
RF Frequency Band
2400-2483.5MHz
Approximate RF Sensitivity
-81dBm
Working Distance
492ft/150m(LOS area),
164ft/50m(NLOS area)
Mounting
Pocket Clip
Number of Audio Channels
1
Audio Output
1/8” / 3.5mm TRS Mic Output
1/8“ / 3.5mm TRS Headphone Output
Gain
0-5 Level
Audio Output Level
Line Out: 1V; Monitoring: 25-30mW
Power Requirements
3.3V-4.7V
Battery Type
Built-in Lithium Battery, 500mAh
Battery Charging Time
1.5h
Battery Life
8h
Display
TFT Screen
Dimensions52×42×17mm
MaterialPlastic
Weight39g

Microphone

Form Factor
Built-in/External Mic
Sound Field
Mono
Polar Pattern
Omnidirectional
Frequency Range
50Hz-20KHz
Sensitivity
-40dB (±3 dB, re 1V/Pa at 1KHz)
Max. SPL
135dB SPL (at 1KHz)

Specifications

Transmitter (TX )

Wireless Transmission
Digital 2.4GHz
RF Frequency Band
2400-2483.5MHz
Frequency Response
20Hz-20KHz
Working Distance
492ft/150m(LOS area), 164ft/50m(NLOS area)
MountingPocket Clip
Audio Input
1/8" / 3.5 mm TRS Mic Input
Audio Input Level
1V (0dBV)
RF Output Power
<10mW
Power Requirements
3.3V-4.7V
Battery Type
Built-in Lithium Battery, 500mAh
Battery Charging Time
1.5h
Battery Life
8h
Display
TFT Screen
Dimensions
52×42×17mm
Material
Plastic
Weight39g

Receiver (RX)

Wireless Transmission
Digital 2.4GHz
RF Frequency Band
2400-2483.5MHz
Approximate RF Sensitivity
-81dBm
Working Distance
492ft/150m(LOS area), 164ft/50m(NLOS area)
Mounting
Pocket Clip
Number of Audio Channels
1
Audio Output
1/8” / 3.5mm TRS Mic Output
1/8“ / 3.5mm TRS Headphone Output
Gain
0-5 Level
Audio Output Level
Line Out: 1V; Monitoring: 25-30mW
Power Requirements
3.3V-4.7V
Battery Type
Built-in Lithium Battery, 500mAh
Battery Charging Time
1.5h
Battery Life
8h
Display
TFT Screen
Dimensions52×42×17mm
MaterialPlastic
Weight39g

Microphone

Form Factor
Built-in/External Mic
Sound Field
Mono
Polar Pattern
Omnidirectional
Frequency Response
50Hz-20KHz
Sensitivity
-40dB (±3 dB, re 1V/Pa at 1KHz)
Max. SPL
135dB SPL (at 1KHz)

Showcase

Showcase

SYNCO G2(A2)
SYNCO G2(A2)
SYNCO G2(A2) Application
SYNCO G1(A1)
SYNCO G1(A1)
SYNCO G1(A1) Application
SYNCO WMic-TS Mini
SYNCO WMic-TS Mini
SYNCO WMic-TS Mini Application
SYNCO G1(A2)
SYNCO G1(A2)
SYNCO G1(A2) Application
SYNCO G2(A2)
SYNCO G2(A2)
SYNCO G2(A2) Application
SYNCO G1(A1)
SYNCO G1(A1)
SYNCO G1(A1) Application

Downloads

  • User Manual for SYNCO G2(A1) (English)

Downloads

  • User Manual for SYNCO G2(A1) (English)