A vlog screen for phone makes selfie recording easier and helps you get better video quality with the rear camera. Choosing the right gear is just the first step - now it’s time to learn how to use it effectively. In this article, you’ll learn:
- How to set up a vlog screen for iPhone and Android phones
- How to troubleshoot common issues
- How to use it like a pro to shoot high-quality videos
Whether you’re a beginner vlogger or a mobile filmmaker, this guide will help you get the most out of your gear.
How to set up a vlog screen for phone
Setting up a vlog screen for your phone is usually quick, but the steps can vary depending on your phone model and how the screen connects. In this section, we’ll walk you through how to set it up on both iPhone and Android phones. Not sure which one to buy? Read our review to help you choose a phone vlog selfie monitor screen.
Set up a phone vlog screen for iPhone
The vlog screen for iPhone has wired and wirelss connection. Follow the steps below based on your setup.
👉Wired connection (iOS 15 and above):
1. Ensure your iPhone runs iOS 15 or later, as many vlog screens don’t support older versions.
2. Use the correct data cable for your iPhone model:
- For iPhone 15 and newer: USB-C to USB-C cable
- For iPhone 14 and older: USB-C to Lightning cable
3. Connect one end of the cable to your iPhone.
4. Plug the other end into the vlog screen’s video input port (Not charging port).
5. Wait a few seconds for the screen to mirror automatically.
6. Press the button on the vlog screen to adjust the display as needed.
👉Wireless connection via WiFi or Bluetooth:
1. Open the Settings app on your iPhone.
2. Enable WiFi or Bluetooth, depending on your vlog screen’s connection type.
- If it uses WiFi, find and connect to the vlog screen’s WiFi network, entering the password if prompted.
- If it uses Bluetooth, pair your iPhone with the vlog screen device, entering the PIN code if requested (commonly “1234”).
3. Swipe down to access Control Center and tap “Screen Mirroring”.
4. Select the vlog screen device to start mirroring your display.
5.Press the button on the vlog screen to adjust the display as needed.
Not sure if you’ve got the setup right? Watch this quick video tutorial to see exactly how to connect the SYNCO XView M4 vlog screen to your iPhone.
Set up a vlog screen for Samsung and other Android phones
Most vlog screens for Android phones connect wirelessly, either through WiFi screen mirroring or Bluetooth pairing. The exact steps may vary depending on your phone brand and the screen type.
1. Power on the vlog screen.
2. Turn on WiFi or Bluetooth on your phone to connect with the screen:
- For the WiFi vlog screen, go to your phone’s Settings > WiFi, select the screen’s WiFi network, and connect.
- For the Bluetooth vlog screen, turn on Bluetooth on your phone, pair with the screen (PIN may be 1234), and wait for the connection.
3. Enable the screen projection function on your phone:
- For Samsung: Tap Smart View
- For Huawei: Tap Wireless Projection
- For Xiaomi: Tap Wireless Display”
4.Select the vlog screen device from the list.
5. Tap Start now or Allow if prompted.
6. Wait a few seconds for the screen to mirror.
⚠️Note: Screen projection names vary by brand. If not listed, check your phone’s settings or manual.
How to troubleshoot the vlog screen monitor for phone not working
Even the best vlog screens for phones can sometimes experience issues. In this section, we’ll cover common problems and easy solutions to help you fix them quickly.
The vlog screen for phone has lag or delay issues
Lag or delay when using a vlog screen for phone often results from poor signal quality or high processing demands. Wireless connections are more prone to this issue. Here's a guide to help you troubleshoot:
✅Keep your phone and screen within close range to ensure a stable connection.
✅Reduce signal interference by turning off other nearby WiFi or Bluetooth devices.
✅Lower the screen resolution (e.g., 1080p) to ease data transmission and reduce lag.
✅Close unused apps running in the background to boost phone performance.
✅Use a wired connection if possible for faster, more reliable video transmission.
The video screen for phone is not displaying anything
A blank or black screen often means the video signal isn’t being properly sent from your phone to the monitor.
✅Make sure your phone is successfully connected to the vlog screen.
✅Confirm that the correct input mode (HDMI, Type-C, etc.) is selected on the screen.
✅Restart both your phone and the vlog screen to refresh the connection.
✅Test with another phone or cable to rule out compatibility issues.
✅For wireless setups, re-pair or reconnect your phone to the screen network.
The vlog monitor screen for phone has no sound
If there’s no audio while using your vlog screen, the sound might be routed elsewhere or muted.
✅Check if your vlog screen supports audio output since some models only display video.
✅Make sure your phone’s volume is turned up and not muted.
✅Try using headphones to test whether your phone is outputting sound properly.
✅If using a Bluetooth connection, confirm whether it supports both video and audio.
✅Adjust audio settings in your phone’s screen mirroring or projection menu.
Pro tips for using a vlog screen for phone to record high-quality videos
Here are some practical tips to effectively use your vlog screen for phone and take your content to the next level.
Tip 1: Maintain eye contact with the lens, not your phone vlog screen
When using a vlog screen for phone video recording, it’s easy to get distracted by your reflection. To build a stronger connection with your audience, look into the camera lens, not the screen. A glance at the monitor helps with framing, but consistent eye contact makes your video more engaging.
Tip 2: Use a selfie stick or tripod to keep the phone and vlog screen steady
If you’re hand-holding your phone vlogging setup, use a selfie stick or tripod for better stability. A stable frame looks more professional and frees you to focus on your content. You can use the vlog screen to check your posture and ensure your movements stay within frame.
Tip 3: Face a soft, even light when using a vlog screen for phone
Before recording, use the vlog screen to check how light hits your face. Always face a bright, even light source, like a window or ring light, to avoid harsh shadows. If your face appears too dark or too bright, adjust your position, exposure settings, or lighting setup for a balanced look.
Tip 4: Use the timer or wireless shutter for hands-free shots
Some brands like SYNCO offer advanced vlog screens for phones with a built-in wireless shutter. Use it to start recording without touching your phone, which reduces camera shake and lets you strike a natural pose. This is ideal for solo creators or when filming group shots.
Conclusion
Using a vlog screen for phone can greatly improve your video quality and recording experience. By following the setup steps, troubleshooting tips, and pro advice shared in this guide, you’re ready to create sharper, more professional content. Start using your vlog screen with confidence and watch your videos stand out.