Camera Mount Microphone SYNCO M2S
SYNCO Mic-M2S is a camera mount microphone launched for outdoor shooting particularly. Its 100Hz high-pass filter is easily switchable to cut down ambient noises, its SNR is set at 76dB to restore as many signal details as possible; its 32g-weighed metal construction isolates RF interference without adding heft to the rig; its 4-day long working life is ample for continued shooting...This camera microphone is perfectly suitable for mobile journalists, speakers, vloggers, and run-and-gun shooters.
Sound Performance Ensured
The 100Hz switchable high-pass filter rolls off ambient noises such as current sound and airflow noises; the 76dB relatively high SNR restores the signal details as many as possible; the metal construction locks out RF interference. All this cuts down on those destroying the recording and improves the sound performance.
Working Status Shown
The LED indicator is intended to simplify the use of this on camera microphone for DSLR. It turns “green” when the microphone is power-on and “blue” if the high-pass filter is on. Just focus on your shooting and keep yourself away from any chaotic operation.
Varied Devices Allowed
The 32g light and small device fits on the camera securely using a cold shoe or 1/4”screw hole, adding no weight to the small mobile device and never hindering your movement. The 3.5mm TRS/TRRS cables allow the camera mounted shotgun microphone to directly connect to most 3.5mm input DSLR cameras, recorders, smartphones, etc.
Outdoor Shooting Suited
Just 1 AAA alkaline battery is needed to support 90-110 hours (= about 4 days) continued working of the SYNCO M2S. The included wind muff and shock mount made of silicon rubber help minimize the air interference and mitigate unwanted shocks and vibrations. All this makes it the best directional on-camera microphone for outdoor shooting.
SYNCO Mic-M2S camera mount microphone carries every feature for outdoor shooting. It’s perfectly suitable for mobile journalists, speakers, vloggers, and run-and-gun shooters.
Sound Performance Ensured
100Hz high-pass filter to roll off ambient noises, 76dB SNR to restore signal details, metal construction to lock out RFI...
Ultra-flat Frequency Response
The frequency response range is 20Hz—20KHz. With ultra-flat frequency response, Mic-D2 outputs all the frequencies that we can hear at once and produces accurate natural sound from the source.
Working Status Shown
“Green” when the mic is power-on and “blue” when the high-pass filter is on.
Varied Devices Allowed
3.5mm TRS/TRRS cables allow M2S to directly connect to most 3.5mm input DSLR cameras, recorders, smartphones, etc.
Outdoor Shooting Suited
With 1 battery, the included wind muff, and shock mount, the M2S could work for about 4 days continuously outside.
Specifications
| Transducer | Electret Condenser |
|---|---|
| Frequency Response | 35Hz-18KHz |
| Dynamic Range (Typical) | 90dB |
| Signal/Noise | 76dB |
| Maximum SPL | 120dB |
| Sensitivity | -35dB±3dB/ 0dB=1V/Pa,1KHz |
| Power Requirement | AAA Battery x 1 |
| Output Connector | 3.5mm TRS |
| Battery Life | 100h |
| Dimensions (L x Diam) | 90×20.5mm |
| Weight | 32g |
Specifications
| Transducer | Electret Condenser |
|---|---|
| Frequency Response | 35Hz-18KHz |
| Dynamic Range (Typical) | 90dB |
| Signal/Noise | 76dB |
| Maximum SPL | 120dB |
| Sensitivity | -35dB±3dB/ 0dB=1V/Pa,1KHz |
| Power Requirement | AAA Battery x 1 |
| Output Connector | 3.5mm TRS |
| Battery Life | 100h |
| Dimensions (L x Diam) | 90×20.5mm |
| Weight | 32g |
Showcase
Showcase
Related Products
Related Products
Frequently Asked Questions
Frequently Asked Questions
Downloads
- User Manual for SYNCO Mic-M2S (English)
Downloads
- User Manual for SYNCO Mic-M2S (English)