Dual Microphone for Phone SYNCO P2T & P2L
The P2 is a new lineup of dual microphone for phone at SYNCO. It has two models, which separately work for Android phone and iPhone®. Two transmitters and a dual-channel receiver enable it to record in a stereo mode. The fast pairing, strong signal transmission, long battery life of 15 hours (at most) provide excellent recording, making it a great mobile solution to two-person vlog, podcast, and live streaming.
The P2 is a new launch. SYNCO will soon provide video reviews and more information about it. Now you could try to get some details below and send us your REQUEST if you are seeking for a dealership.
Buy OnlineTwo Models
The SYNCO P2 dual microphone for mobile phone has two models to mount to different devices. The P2T with a Type C connector mounts onto Android phones while the P2L goes for iPhone® using a Lightning connector.
Two Transmitters
Compared to the single channel P1, the P2 adds one more transmitter and carries a dual-channel receiver to provide both mono and stereo modes. This 2 channel microphone can record two sound sources at the same time with each transmitter clipping on separate talent's lapel.
Two Colors
The mini P2 comes in two colors. One is Pearl White and the other is the unique Stone Blue. The mics utilize exceptional materials and industry-leading paint-spraying technology to build incredible resistance to abrasion and corrosion.
Case Charger
The dual recording microphone for cell phone P2T and P2L are both equipped with a charging case - charging is available anytime and anywhere. Once the transmitter is in the case, there will be RED light on it to show that it is in charging. The united receiver is powered by the smartphone.
Auto Pairing
The charging case adopts a drawer style. Tap the case and it will open, then the transmitters will automatically get connected to the receiver. This is the SYNCO ActiveSense™ contact pairing technology, a professional way to save time using this quality dual microphone wireless for phone recording.
Fast Charging
Ten minutes charging affords 45 minutes shooting. A full charge of 1.5 hours enables the dual microphone for iPhone® and other smartphones to conduct five hours of recording. With two additional charges in the case, a total of 15-hours runtime is possible.
Strong Signals
Equipped with Syncoder™ Encrypted Transmission Algorithm 3.0 and an intelligent DSP chip, the P2 is able to transmit strong signals within the 492ft/150m clear line of sight. Even when an obstacle stands within 164ft/50m, the dual lapel microphone for iPhone® and Android phones still processes the audio smoothly.
Clear Sounds
The SYNCO Acoustic Noise Cancelling™ technology makes use of the inbuilt noise reduction chip to remove the low-frequency noises and restore the subtle sound changes, hence providing faithful and clear sounds.
Fickle Voices
The P2 microphone for podcasting offers 9 creative voice effects, including Original, Studio FX, KTV FX, Voice Amplification, EDM (Electronic Dance Music), Baby FX, Male to Female, Female to Male and Monster FX. They are great voice modifications, expanding the use into gaming, vlogging, and even singing.
Real Monitor
One of the included accessories, the Type-C to 3.5mm adapter allows a headphone to plug in to monitor the current recording and backgrounding and avoid dropouts or inappropriate volume.
Small Microphone
The brand-new Micro Electro Mechanical System (MEMS) comes to provide an built in mic that is light in weight and tiny in size, and continues performing well in recording.
Compact System
The dual microphone for Android and Apple devices is light and small. The transmitters are earbud-sized and weigh 10g each while the receiver is 5g. It is a portable package, an excellent mobile solution for outdoor recording.
If you are a camera user and need small camera microphone, view SYNCO M1S.
Dynamic Light
The transmitters and receiver are embedded with a light strip to trigger the Monster Halo cool light effect and enrich the sense of sound rhythm of this dual lavalier microphone system for iPhone®, iPad, and Android. It also applies to the charging case to show battery life.
The P2 is a new lineup of dual microphone for mobile phones. The fast pairing, strong signal transmission and long battery life make it a great solution to two-person filmmaking.
Ultra-flat Frequency Response
The frequency response range is 20Hz—20KHz. With ultra-flat frequency response, Mic-D2 outputs all the frequencies that we can hear at once and produces accurate natural sound from the source.
Ultra-flat Frequency Response
The frequency response range is 20Hz—20KHz. With ultra-flat frequency response, Mic-D2 outputs all the frequencies that we can hear at once and produces accurate natural sound from the source.
Two Models
The SYNCO P2 includes P2T for Android phone and P2L for iPhone®.
Two Transmitters
P2 consists of two transmitters and one receiver, providing stereo mode and mono mode.
Two Colors
It comes in two colors, including Pearl White and Stone Blue.
Ultra-flat Frequency Response
The frequency response range is 20Hz—20KHz. With ultra-flat frequency response, Mic-D2 outputs all the frequencies that we can hear at once and produces accurate natural sound from the source.
Case Charger
The P2T and P2L both come with a charging case. The RED light shows it is in charging.
Auto Pairing
The charging case adopts drawer style. Just one tap and the case will open, then the transmitters will connect to the receiver automatically.
Fast Charging
A charging of 10 mins supports a recording of 45 mins. In total, up to 15 hours of runtime is available with the charging case.
Ultra-flat Frequency Response
The frequency response range is 20Hz—20KHz. With ultra-flat frequency response, Mic-D2 outputs all the frequencies that we can hear at once and produces accurate natural sound from the source.
Strong Signals
The P2 is able to transmit signals within the 492ft/150m clear line of sight and 164ft/50m between obstacles.
Clear Sounds
The SYNCO Acoustic Noise Cancelling™ technology uses the inbuilt noise reduction chip to eliminate low-frequency noise.
Fickle Voices
Nine creative effects - Original, Studio FX, KTV FX, Voice Amplification, EDM (Electronic Dance Music), Baby FX, Male to Female, Female to Male and Monster FX - modify voices and expand uses.
Real Monitor
In-ear monitoring works by plugging a headphone in to listen to the mix of current recording and backgrounding.
Ultra-flat Frequency Response
The frequency response range is 20Hz—20KHz. With ultra-flat frequency response, Mic-D2 outputs all the frequencies that we can hear at once and produces accurate natural sound from the source.
Small Microphone
Thanks to Micro Electro Mechanical System (MEMS), the built in mic is light in weight and tiny in size, but still performs well in recording.
Compact System
The transmitters are earbud-sized and weigh 10g while the receiver is 5g in weight.
Dynamic Light
Light strips are embedded on transmitters, receiver and charging case to make the frame look dynamic with the Monster Halo cool light effect.
Ultra-flat Frequency Response
The frequency response range is 20Hz—20KHz. With ultra-flat frequency response, Mic-D2 outputs all the frequencies that we can hear at once and produces accurate natural sound from the source.
Specifications
Transmitter (TX )
| Wireless Transmission | Digital 2.4GHz |
|---|---|
| RF Frequency Band | 2400-2483.5MHz |
| Frequency Response | 20Hz-20KHz |
| Working Distance | 492ft/150m (LOS area);
164ft/50m (NLOS area) |
| Sampling Rate | 48KHz |
| Bit Depth | 16Bit |
| Sensitivity | -26dB |
| SNR | ﹥75dB |
| RF Output Power | 10dB |
| Battery Type | Built-in Lithium Battery, 120mAh |
| Battery Charging Time | 1.5h |
| Battery Life | 5h |
| Dimensions | 49x19x19 (mm) |
| Material | ABS |
| Weight | 10g |
Receiver (RX)
| Wireless Transmission | Digital 2.4GHz |
|---|---|
| RF Frequency Band | 2400-2483.5MHz |
| Working Distance | 492ft/150m(LOS area); 164ft/50m(NLOS area) |
| Sampling Rate | 48KHz |
| Bit Depth | 16Bit |
| Antenna | Built-in |
| Monitoring | 3.5mm In-Ear Monitoring |
| Connector | P2L: Lightning; P2T: Type-C |
| Power Input | Type-C |
| Dimensions | 49x30x9 (mm) |
| Material | ABS |
| Weight | 5g |
Wireless Charging Case
| Battery Type | Built-in Lithium Battery, 300mAh |
|---|---|
| Battery Charging Time | 2h |
| Charging Port | Type-C |
| Power Requirements | 5V 2A |
| Dimensions | 70x68x38 (mm) |
| Weight | 87.5g |
Specifications
Transmitter (TX )
| Wireless Transmission | Digital 2.4GHz |
|---|---|
| RF Frequency Band | 2400-2483.5MHz |
| Frequency Response | 20Hz-20KHz |
| Working Distance | 492ft/150m(LOS area); 164ft/50m(NLOS area) |
| Sampling Rate | 48KHz |
| Bit Depth | 16Bit |
| Sensitivity | -26dB |
| SNR | ﹥75dB |
| RF Output Power | 10dB |
| Battery Type | Built-in Lithium Battery, 120mAh |
| Battery Charging Time | 1.5h |
| Battery Life | 5h |
| Dimensions | 49x19x19 (mm) |
| Material | ABS |
| Weight | 10g |
Receiver (RX)
| Wireless Transmission | Digital 2.4GHz |
|---|---|
| RF Frequency Band | 2400-2483.5MHz |
| Working Distance | 492ft/150m(LOS area);
164ft/50m(NLOS area) |
| Sampling Rate | 48KHz |
| Bit Depth | 16Bit |
| Antenna | Built-in |
| Monitoring | 3.5mm In-Ear Monitoring |
| Connector | P2L: Lightning; P2T: Type-C |
| Power Input | Type-C |
| Dimensions | 49x30x9 (mm) |
| Material | ABS |
| Weight | 5g |
Wireless Charging Case
| Battery Type | Built-in Lithium Battery, 300mAh |
|---|---|
| Battery Charging Time | 2h |
| Charging Port | Type-C |
| Power Requirements | 5V 2A |
| Dimensions | 70x68x38 (mm) |
| Weight | 87.5g |
Related Products
Related Products
Downloads
- User Manual for SYNCO P2T (English)
- User Manual for SYNCO P2L (English)
Downloads
- User Manual for SYNCO P2T (English)
- User Manual for SYNCO P2L (English)
Become a Dealer
Become a Dealer