Questo sito non supporta completamente il tuo browser. Ti consigliamo di utilizzare Edge, Chrome, Safari o Firefox.

How to use wireless lapel microphone for computer, camera, and smartphone?

Artists, presenters, and massive production set all benefit from lapel microphone wireless for recording. It eliminates unneeded wire clutter, features easy setup, and allows users to walk around freely while performing. Also, it can be used for different kinds of devices. How to connect it for trouble-free shooting? How to hide it for the clean frame? In this article, we will offer tips for you to solve the problems.

SYNCO G1(A1) wireless lapel microphone for DSLR connects the receiver to DSLR with a 3.5mm cable.

Tips to connect wireless lapel microphone to camera, smartphone, and computer

The first and most critical step toward high-quality audio is connection. Because it is different to connect wireless microphone to camera, smartphone, and camra, we will explain it individually in the following.

Camera

The first step to connecting the wireless lapel condenser microphone to camera is to mount the receiver onto DSLR camera. Every receiver has got a clip. So you can use that clip to mount it on top of the DSLR shoe. If your receiver has got antennas, turn them to 90 degrees. 

The most important thing is to use the correct cable, which is a TRS to TRS cable. Every TRS plug has got two black rings. Connect one end of the cable to the back of the receiver where it says output and the other end of the cable to the side of your DSLR where it says mic.

If your transmitter has a place to insert a lavalier mic, then insert the level layer mark to the mic port. And rotate the antenna to get the maximum range if your transmitter has got an antenna. Then you can simply hold the power button for three or more seconds to turn on the transmitter. You can understand that the transmitter is picking up your voice when the indicator light starts blinking as you speak.

Use the clip on the back of your transmitter and clip your transmitter to the side of your pocket. Pass the lavalier mic from underneath your clothes and then clip it to the collar of your t-shirt or any other convenient position where it is as close as possible to your mouth.

If your transmitter has an internal mic, you can directly place it on your clothes as close as possible to your mouth.

SYNCO manufactures wireless lapel microphones for cameras, computers, and smartphones. They are sold at Moman PhotoGears Store.

Go and buy SYNCO wireless lapel microphone at Moman PhotoGears Store

Smartphone

Connect the lapel microphone wireless to the charging port using a Type C or Lightning connector. If you have an iPhone 7 or later or an Android phone without a headphone jack, a microphone with a Lightning or Type-C connector will greatly simplify the connection. You only need to connect the receiver to the charging port. Then your phone will recognize the wireless lapel microphone for iPhone or Android phone as the default audio recording equipment and begin recording.

Connect through the 3.5mm jack with TRRS cable. This is also straightforward. It involves two steps: first, ensure that the microphone has a TRRS connector with three black rings, and then plug it into the phone's 3.5mm socket.

Utilize an adaptor. Sometimes the wireless lapel microphone and receiver cannot match the input port perfectly. Buying a new one is unrealistic, therefore investing in an adaptor is an excellent option. It is simple to determine the adapter you require based on the microphone output and the phone port. When one end contacts the mic and the other end connects to your phone, the connection is complete.

Computer

Tell the plug of the receiver. Wireless lapel microphone for computer typically has two types of jacks: TRRS, which stands for "Tip, Ring, Ring, Sleeve," and USB, which is flat. The corresponding ports can be found on the majority of computers.

Locate the appropriate port on the computer. Typically, a computer has a pink port with a microphone icon over it. If your microphone has TRRS, just connect it to the port to begin sound testing.

If you have a USB lapel microphone wireless for computer, simply insert it into a free USB port on the computer, since there are two or more USB ports configured.

Examine the audio recording. Select the target external microphone as the default device in the Sound settings. A bar may be seen nearby. Put your microphone to the test. Speak into the microphone; if you see the blue bar moving up and down, it is working.

For the best wireless lapel microphone for computer, check the article Wireless microphone for computer: Top 4 choices at SYNCO.

SYNCO G2(A2) wireless lapel microphone for computer carries display screen and clips on the talent's clothes.

Five tips to hide lapel microphone wireless underneath clothing

Sometimes you need to hide the wireless lapel microphone set for better video output. Here are five methods for concealing wireless lavs beneath your actors' shirts:

Place the lapel mic under shirt inseam

Use this as your go-to if your subject is wearing a thick T-shirt. Run the microphone cable up the back, through their shirt. Use gaffer's tape to attach the microphone to the inseam of the man's shirt next to the collarbone.

Placing the mic near the collarbone helps pick up good audio, as the subject's clothing won't move much in that position, so there won’t be too much rustling on the mic. This makes it one of the most commonly used hiding spots.

Hide the lavalier lapel microphone wireless behind the shirt collar

When the talent is wearing a collared shirt, this tip works well. Place the receiver on the back of the talent and pull the cable up the back of their shirt. Feed the microphone through their collar and tape it slightly beneath the fold at one end.

Keep in mind that the cable will be visible from behind. This can be remedied by having the talent wear a blazer or suit jacket to hide it.

Thread through the buttonhole

Choose this hiding spot when the talent wears a dark button-down shirt. Pull the cable to the front of the shirt and glue the wires to the inside of the shirt. Feed the microphone directly through the buttonhole near the top of the shirt.

To further hide the microphone, tuck it under the flap between the 2 grommets. Wrap a piece of moleskin tape around the microphone to eliminate rustling noises caused by the cloth moving on top of it.

Conceal lapel wireless mic in a tie

The tie provides several different hiding points. Use the built-in clip to clip the microphone to the back of the tie for an easy solution. Alternatively, loosen the tie knot and thread the mic down through it until it is almost dangling from the knitted bottom behind the tie.

Wrap a piece of moleskin tape around your lapel mic if you prefer to hide it in a tie to prevent contact noise.

If you feed a lapel mic via a tie knot, make sure it's an omnidirectional mic; otherwise, the subject's voice won't be picked up effectively.

Tape the mic directly to chest

If the subject wears a thin T-shirt or top, use this method. Pass the cable through the front of the shirt. Tape the microphone to their chest, right below their shirt collar.

This hiding area frequently results in the recording of more bass notes from the individual's voice, thus it might also be a nice choice if you're seeking that effect.