A condenser microphone for android uses capacitor technology to convert acoustic energy into electrical energy and is designed to directly use with android smartphones, tablets, and other devices. It guarantees that you can record high quality audio whether you're filming a video or creating a new podcast episode. In this article, we will talk about the following topics to take you deeper into it.
- Why to use condenser mic for android devices?
- How to choose the best condenser microphone for your android recording?
- How to connect it to your android phone?
- FAQs you may encounter during the use.
Why should you use condenser mic with android: Two benefits of it
Most microphones could be used in a variety of scenarios, however, some will thrive while others would fail owing to intrinsic characteristics. Let's look at some of the primary advantages of condenser microphones over dynamic microphones in general.
It offers better sound quality
Great condenser microphones have a very wide frequency response, which is one of their key benefits. Both low and high frequencies may be reproduced with accuracy.
As we've already said, it uses a super-thin membrane as its diaphragm since it has a smaller mass and is more sensitive to sound pressure. With less self-noise, a wider frequency response, and greater transient response, it results in a more accurate depiction of the sound source.
It captures more details in audio
Mini condenser microphone for android of high quality features high sensitivity, This implies that they can detect very faint sounds. They can pick up more subtleties in vocals and can record more information in sound. In addition, it will be able to take up sounds more consistently and from a greater distance than a dynamic mic, resulting in a more balanced recording.
Go and buy at Moman PhotoGears Store
How to choose the best condenser microphone for android?
Below are the factors to consider for a condenser microphone for android phone:
- Physical connection: How well does the microphone connect to or attach to the smartphone? Will it fit on the smartphone if it is protected by a case?
- Electrical connection: How stable and clean is the electrical connection for transferring audio signals properly?
- Audio quality: How well does the transducer transform sound into audio? In the case of digital connections, how efficient is the analog-to-digital converter, and to what specifications does the microphone output digital audio?
- Durability: Is the microphone made of sturdy materials, or is it made of flimsy, easily breakable materials?
- Overall functionality: How simple is it to operate the microphone, and what software—if any—is required for it to work correctly with an Android smartphone? Does it offer multiple features (such as polar patterns, digital signal processing, headphone monitoring, etc.)?
How to connect condenser mic to android phone?
As is well known, cellphones are digital devices that utilize digital audio, just like PCs. In order to transmit data to a smartphone or computer, microphones emit analog signals that must be transformed to digital audio using an analog-to-digital converter.
Smartphones include built-in analog-to-digital converters (ADCs), but we may also utilize specialized adapters to connect our condenser microphone to our smartphone digitally, mostly via the charging port.
In this post, we'll go through two simple ways to use condenser microphone for android tablet and smartphone:
- Via TRRS headphone jack
- Via charging port
Connect condenser microphone for android via TRRS headphone jack
The most obvious is to use the jack on a smartphone. Headphone jacks on smartphones are commonly 3.5mm (1/8’’) TRRS (Tip-Ring-Ring-Sleeve) female connectors.
The TRRS connection is set up as follows:
- Tip: Audio (left)
- Ring: Audio (right)
- Ring: Ground
- Sleeve: Microphone
The four connections support a microphone and a left and right speaker. In this situation, a single route completes all three of these circuits. Thus you'll need to utilize a 3.5mm (1/8’’) TRRS male connector to connect a condenser microphone to a smartphone's headphone jack.
The mic signal is carried on the "sleeve," therefore even though 3.5mm (1/8") TS and TRS cables will physically fit into the smartphone's port, they will not function. Moreover, the S (sleeve) is set up as ground in TS and TRS cables.
A microphone splitter cable is recommended to convert a 1/8" TS or TRS connection to a 1/8" TRRS connection. You may also utilize a condenser microphone for android phone featuring TRRS plug, which eliminates the need for adapters when connecting a standard condenser mic to a smartphone via the headphone port. It is designed to directly plug into the headphone jack and then send audio. The SYNCO U1P is such a kind of mic. It is designed with a 3.5mm TRRS plug to work with android phones and tablets. The cardioid condenser makes it focus on the target sounds that it is pointed at. It is also 90° foldable to get proper audio pickup angle.
Connect via charging port
There is also condenser microphone for android on the market that connects to the charging port through a USB-C cable or connector. For example, the SYNCO P2S is a mini microphone wireless for android phones. Its receiver features a Type-C connector, so it can be directly plugged into the charging port and start to capture sounds.
To connect to the charging port and begin transferring data, the microphone signal must be transformed to digital audio. This is accomplished through the use of an Analog-to-Digital Converter, which is typically situated between the microphone capsule and the charging port plug.
If you want to use condenser microphone for laptop, check the article How and when to use condenser microphone for laptop? to get more information.
Q: How do I select an external microphone as audio input on Android?
A: Thankfully, there is no need to be concerned about how to activate the microphone on an Android phone. You won't need to make any selections in your phone's settings for the majority of external microphones, if not all of them, in order to begin utilizing your external microphone. It will start working as soon as it is plugged into your device's charging port or aux input.
Q: How can I improve my microphone quality for Android?
A: Unfortunately, Android smartphones are not built to record audio, and there are few to no choices for mic input levels in the phone's settings. Nevertheless, if you download an app intended for it, you may obtain superior audio recordings on your Android mobile. The Google Play store has free applications.