SYNCO Xtalk EasyGo
Step 1. Download EasyGo Tool
- Xtalk EasyGo_EN_1.0.9
Step 2. Read the notes to ensure successful update
Ensure the firmware version matches your intercom series (X series/XPro series). Updating the mismatched version may cause product damage.
For Firmware/Voice Pack Update:
1. Connect the headset to the SYNCO EasyGo, choose the firmware, and long press the + & - buttons on Xtalk headset.
2. Release the button + then button - after hearing "beep beep" → "beep", and click "Install" on SYNCO EasyGo.
3. Please install the voice pack after successfully updating the firmware.
* No need to repeat the above steps for the next update.
* If the update fails due to disconnection, please remove the cable and then reconnect to continue.
For Pairing:
1. For pairing X with XPro series headset, please note that the LOW Ver. is only compatible with the LOW Ver.
EG. X Series headset (X5_BM_LOW_1.1.3.1.bin) & XProSeries headset (X5_PRO_LOW_1.1.3.0.bin).
* The LOW version refers to the low latency version.
2. For connecting over 5 headsets, please keep a min. distance of 50cm between each one to avoid disconnection due to signal interference.
3. Headsets with the LOW version firmware cannot connect to the Xtalk Link Signal Boost.
Step 3. Download the firmware according to your product model
- X5_BM_1.0.3.1.bin
"Xtalk Firmware (for 5 units) V1.0" only compatible with X series; Connect up to 5 headsets; Default Boost Mode: Mode 2.
Available for pairing with the XPro headset (Except for LOW Ver.).
- X5_BM_LOW_1.1.3.1.bin
"Xtalk Low Latency Version Firmware (for 5 units) V1.0" only compatible with X series; Connect up to 5 headsets; 80ms Latency; Default Boost Mode: Mode 2.
Available for pairing with the XPro headset (For LOW Ver. Only).
- X9_BM_2.0.0.3.bin
"Xtalk Firmware (for 13 units) V1.0" only compatible with X series; Connect up to 13 headsets; Default Boost Mode: Mode 2.
Available for pairing with the XPro headset (Except for LOW Ver.).
- X9_BM_LOW_2.1.0.3.bin
"Xtalk Low Latency Version Firmware (for 13 units) V1.0" only compatible with X series; Connect up to 13 headsets; 180ms Latency; Default Boost Mode: Mode 2.
Available for pairing with the XPro headset (For LOW Ver. Only).
- X5_PRO_1.0.3.0_.bin
"XPro Firmware (for 5 units) V1.0" only compatible with XPro series; Connect up to 5 headsets; Default Boost Mode: Mode 2.
Available for pairing with the X headset (Except for LOW Ver.).
- X5_PRO_LOW_1.1.3.0.bin
"XPro Low Latency Version Firmware (for 5 units) V1.0" only compatible with XPro series; Connect up to 5 headsets; 80ms Latency; Default Boost Mode: Mode 2.
Available for pairing with the X headset (For LOW Ver. Only).
- X9_PRO_2.0.0.4.bin
"XPro Firmware (for 13 units) V1.0" only compatible with XPro series; Connect up to 13 headsets; Default Boost Mode: Mode 2.
Available for pairing with the X headset (Except for LOW Ver.).
- X9_PRO_LOW_2.1.0.4.bin
"XPro Low Latency Version Firmware (for 13 units) V1.0" only compatible with XPro series; Connect up to 13 headsets; 180ms Latency; Default Boost Mode: Mode 2. Available for pairing with the X headset (For LOW Ver. Only).
- EN_V100_tone_0511_105039_.bin
English voice pack
- JAP_V100_tone_0521_182004_.bin
Japanese voice pack
- CN_V100_tone_0508_203305_.bin
Chinese voice pack